D1 Oil Catch Tank (Red/Blue)
Comes with hose, bracket and clips
During engine operation, blow-by gases, as well as oil mist from the rotating components of the engine, pass through the PCV valve and are routed back into the intake for the engine to burn off. However, some of the oil mist and other products settle along the engine intake and over time form a "gunk." The oil catch can collects the oil mist and condenses the fuel vapors while allowing "cleaner" gases to be passed back into the intake. Oil catch Tank can keep your intake clean and free from engine oil mist.
Oil Catch Tank -D1
Posted by
skatuner
on Tuesday, January 25, 2011
Labels:
Oil Catch Tank
/
Comments: (0)
D.I.Y COLD AIR INTAKE
Posted by
skatuner
on Wednesday, January 12, 2011
Labels:
Do It Yourself
/
Comments: (2)
My Weekend Project! Cold Air Intake Installation
Bored during weekend give me some idea to install Cold Air Intake. Luckily, manage to borrow drill from my friends. =) Let's get started!
Bored during weekend give me some idea to install Cold Air Intake. Luckily, manage to borrow drill from my friends. =) Let's get started!
First thing first, locate the place to drill CAI hole. In my case, i will drill it just on top of my spotlight.
Here is the tools i use for this project. You will need to get 3inch drill bit since the size for this type of CAI is 3inch.
Cleaning process. Make the hole more smooth so will look much nicer. Can use sandpaper or a chisel.
My CAI hose use the original filter flow which if you can see, the flow is located behind the battery holder. To get till this process, you will need to remove the original Proton air intake.
New Arrival!
Posted by
skatuner
on Friday, January 7, 2011
/
Comments: (0)
New Stock Arrived! JASMA Adjustable Cam Pulley - Campro/Waja 1.6/4g13p, JASMA Myvi Under Drive Pulley Set (3set), JASMA Crank Pulley -4g13p, JASMA Ramp Pipe Kit-Myvi, Ramp Pipe for Wira/Satria, JASMA Silicone Radiator Hose -Kancil/Viva/Kenari/Kelisa/Wira. For more detail please email to us at skatuner@gmail.com
Posted by
skatuner
on Sunday, January 2, 2011
/
Comments: (0)